3D High Performance Resin - Rigid Ceramic - High quality filaments
Par un écrivain mystérieux
Description
High quality 3D High Performance Resin - Rigid Ceramic . Worldwide shipping with UPS & FedEx. One-stop shop for 3D printing materials. Ordered before 15h CET? Ships same business day
Our High Performance Resin - Rigid Ceramic has been reinforced with durable nanoparticle ceramics. This makes it one of the stiffest and strongest materials available on the market. A flexural modules of 9.5 GPa and a maximum flexural strength of 170 MPa can be obtained. Parts made with this resin feature an impressive resistance to bending under high loads. Next to this, the material has excellent chemical and heat resistance properties. The resin prints with an incredibly high resolution and parts printed with the resin have a smooth matte finish. Important key features Reinforced with durable nanoparticle ceramics A superb maximum flexural modulus of 9.5 GPa A superb flexural strenght up to 170 MPa Dimensionally stable under load Strong chemical resistance Good thermal resistance Good compatibility with all SLA, DLP and LCD / MSLA 3D printers in the range of 385 – 420nm Suitable applications Suitable for rapid industrial-grade prototyping Suitable for fabricating electrical casings Suitable for making fluid flow components Suitable for creating aerodynamic test models Suitable for 3D printing short-run injection molds Preparation(s) before starting to print Shake the bottle for at least 2 minutes before each use. After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin The resin can be poured back from the vat into the bottle once your print is finished Always use protective measurements like safety glasses and nitrile gloves when handling resins. Post-processing We do advise you to post-process your 3D print in order to achieve the material properties Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5-10 minutes An ultrasonic cleaner is preferred/recommended Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing to prevent warping or cracking. Place the rinsed parts in a well-ventilated area for at least 4 hours, or use pressurized air for at least 5 minutes Cure your object in a high power curing chamber (like the CUREbox™ Plus) for approximately 60 minutes at 65°C And after that approximately 2 hours of thermal curing at 100°C. The preferred curing wavelength is between 300-410nm Safety Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets. Always wear Respiratory Protection when sanding/cutting the resin object. Always use nitrile gloves when handling resins and uncured resin objects. Print settings Please see below some basic print settings for a variety of wide used printers. Phrozen Sonic Mini 4K 50µm First / Burn-in Layers: 2x to 4x for 70 to 75 Seconds Normal Layers: 7 to 9 Seconds Anycubic Photon 50µm First / Burn-in Layers: 4x to 3x for 110 to 120 Seconds Normal Layers: 16 to 18 Seconds Light-off Delay: 1 Bottom Light-off Delay: 2 Anycubic Photon Mono SE 50µm First / Burn-in Layers: 4x to 6x for 65 to 75 Seconds Normal Layers: 6.5 to 7.5 Seconds Lifting Distance: 8mm Light-off Delay: 0.5 Bottom Light-off Delay: 3 Anycubic Photon Mono X 50µm First / Burn-in Layers: 3x to 5x for 75 to 80 Seconds Normal Layers: 5.5 to 7 Seconds Lifting Distance: 8mm Light-off Delay: 1 Bottom Light-off Delay: 3 UV Power: 85 ~ 90% *If you need the best settings for your 3d printer we highly recommend using the included RERF (Resin Exposure Range Finder) or Resin Exposure Calibration Tool. This is most likely included with the 3d printer usb stick and or manual. Product export information HS Code: 2916140090 Description: Resin for 3D Printing Country of origin: the Netherlands
Our High Performance Resin - Rigid Ceramic has been reinforced with durable nanoparticle ceramics. This makes it one of the stiffest and strongest materials available on the market. A flexural modules of 9.5 GPa and a maximum flexural strength of 170 MPa can be obtained. Parts made with this resin feature an impressive resistance to bending under high loads. Next to this, the material has excellent chemical and heat resistance properties. The resin prints with an incredibly high resolution and parts printed with the resin have a smooth matte finish. Important key features Reinforced with durable nanoparticle ceramics A superb maximum flexural modulus of 9.5 GPa A superb flexural strenght up to 170 MPa Dimensionally stable under load Strong chemical resistance Good thermal resistance Good compatibility with all SLA, DLP and LCD / MSLA 3D printers in the range of 385 – 420nm Suitable applications Suitable for rapid industrial-grade prototyping Suitable for fabricating electrical casings Suitable for making fluid flow components Suitable for creating aerodynamic test models Suitable for 3D printing short-run injection molds Preparation(s) before starting to print Shake the bottle for at least 2 minutes before each use. After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin The resin can be poured back from the vat into the bottle once your print is finished Always use protective measurements like safety glasses and nitrile gloves when handling resins. Post-processing We do advise you to post-process your 3D print in order to achieve the material properties Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5-10 minutes An ultrasonic cleaner is preferred/recommended Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing to prevent warping or cracking. Place the rinsed parts in a well-ventilated area for at least 4 hours, or use pressurized air for at least 5 minutes Cure your object in a high power curing chamber (like the CUREbox™ Plus) for approximately 60 minutes at 65°C And after that approximately 2 hours of thermal curing at 100°C. The preferred curing wavelength is between 300-410nm Safety Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets. Always wear Respiratory Protection when sanding/cutting the resin object. Always use nitrile gloves when handling resins and uncured resin objects. Print settings Please see below some basic print settings for a variety of wide used printers. Phrozen Sonic Mini 4K 50µm First / Burn-in Layers: 2x to 4x for 70 to 75 Seconds Normal Layers: 7 to 9 Seconds Anycubic Photon 50µm First / Burn-in Layers: 4x to 3x for 110 to 120 Seconds Normal Layers: 16 to 18 Seconds Light-off Delay: 1 Bottom Light-off Delay: 2 Anycubic Photon Mono SE 50µm First / Burn-in Layers: 4x to 6x for 65 to 75 Seconds Normal Layers: 6.5 to 7.5 Seconds Lifting Distance: 8mm Light-off Delay: 0.5 Bottom Light-off Delay: 3 Anycubic Photon Mono X 50µm First / Burn-in Layers: 3x to 5x for 75 to 80 Seconds Normal Layers: 5.5 to 7 Seconds Lifting Distance: 8mm Light-off Delay: 1 Bottom Light-off Delay: 3 UV Power: 85 ~ 90% *If you need the best settings for your 3d printer we highly recommend using the included RERF (Resin Exposure Range Finder) or Resin Exposure Calibration Tool. This is most likely included with the 3d printer usb stick and or manual. Product export information HS Code: 2916140090 Description: Resin for 3D Printing Country of origin: the Netherlands
![3D High Performance Resin - Rigid Ceramic - High quality filaments](https://www.3dprintlife.com/media/catalog/product//f/f/ff_peek_spool.jpg)
FormFutura PPSU 3D Printer Filament 500g
![3D High Performance Resin - Rigid Ceramic - High quality filaments](https://images.prismic.io/xometry-marketing/0ac6d3ae-9d3d-4746-82cb-8dc4a2f4236f_3d-printing-filament-spools.jpg?auto=compress%2Cformat&rect=194%2C0%2C750%2C750&w=486&h=486&fit=max)
Types of 3D Printer Filaments
![3D High Performance Resin - Rigid Ceramic - High quality filaments](https://i.all3dp.com/workers/images/fit=scale-down,w=1200,gravity=0.5x0.5,format=auto/wp-content/uploads/2023/06/16181518/no-thats-not-real-marble-its-esuns-pla-marble-ntrotin-via-reddit-230616_download-e1687264383535.jpg)
eSUN Filament: 2023 Buyer's Guide - eSUN 3D Printing Materials
![3D High Performance Resin - Rigid Ceramic - High quality filaments](https://media.springernature.com/full/springer-static/image/art%3A10.1038%2Fsrep23058/MediaObjects/41598_2016_Article_BFsrep23058_Fig1_HTML.jpg)
Three-dimensional printing of continuous-fiber composites by in
![3D High Performance Resin - Rigid Ceramic - High quality filaments](https://www.3dprintlife.com/media/catalog/product/cache/aeea9d31068570c30ffd17648db027b4/p/l/placopper1-175bu1-main.jpg)
Copper3D PLACTIVE AN1 Copper Oxide 3D Filament
![3D High Performance Resin - Rigid Ceramic - High quality filaments](https://www.digitmakers.ca/cdn/shop/products/FDPLA850Black1kg_1400x.png?v=1698698024)
Filaments Depot PLA 3D850 1.75mm 0.5/1.0 kg –
![3D High Performance Resin - Rigid Ceramic - High quality filaments](https://res.cloudinary.com/all3dp/image/upload/w_290,h_290,c_fill,q_90,f_auto/v1663921490/gallery/New%20images/Revised/PLA.jpg)
Material Guide
![3D High Performance Resin - Rigid Ceramic - High quality filaments](https://www.chitusystems.com/wp-content/uploads/2021/09/3.%E9%9F%A7%E6%80%A7%E7%81%B0%E6%A8%A1%E5%9E%8B-1-600x600.png)
Conjure Tough Non brittle resin for miniatures - ChiTu Systems!
Flexible PBAT-Based Composite Filaments for Tunable FDM 3D
![3D High Performance Resin - Rigid Ceramic - High quality filaments](https://cdn.shopify.com/s/files/1/0789/2979/files/Ultrafuse-PP-GF30-Black-180911008638.png?v=1665416291)
U3DPS BASF HTPA CF15 Filament - Black– Ultimate 3D Printing Store
TOUGH AND STRONG: Tough Pro PLA+ is designed for your most demanding projects but prints smoothly and without fuss making it perfect for quick jobs.
![3D High Performance Resin - Rigid Ceramic - High quality filaments](https://m.media-amazon.com/images/I/71V5CB+AstL._AC_UF894,1000_QL80_.jpg)
3D-Fuel 3D Filament High Temp Tough Pro PLA+ Almond, 1.75mm, 1 kg +/- 0.02mm Tolerance, Made in USA, Easy to Print and Works with Most 3D Printer
![3D High Performance Resin - Rigid Ceramic - High quality filaments](https://res.cloudinary.com/engineering-com/image/upload/w_640,h_640,c_limit/DSC_0341_v9wbwo.jpg)
The Best and Most Unique 3D Printer Materials: Photopolymer
![3D High Performance Resin - Rigid Ceramic - High quality filaments](https://forward-am.com/wp-content/uploads/2021/01/forward-am-ultracur3d-rg-35-uai-1166x875.jpg)
Ultracur3D® RG 35 Rigid Photopolymer Material
![3D High Performance Resin - Rigid Ceramic - High quality filaments](https://c-3d.niceshops.com/upload/image/product/large/default/formfutura-high-performance-series-rigid-ceramic-resin-white-750-g-409931-en.jpg)
Formfutura High Performance Series Rigid Ceramic Resin White, 750
![3D High Performance Resin - Rigid Ceramic - High quality filaments](https://i.all3dp.com/workers/images/fit=scale-down,w=1200,h=675,gravity=0.5x0.5,format=auto/wp-content/uploads/2022/01/18222251/best-3d-printers-march-2022.jpg)
The Best 3D Printers in 2024 – Buyer's Guide
depuis
par adulte (le prix varie selon la taille du groupe)